Are you having trouble receiving strong Wi-Fi signals, in some parts of your house or workplace? A good way to improve network coverage and guarantee a steady, reliable connection across your room is with a D-Link 1320 Wi-Fi extender. You may connect your D-Link 1320 Wi-Fi extender by following the instructions in the guide below.
Step 1: First Setup and Unpacking
Let’s start with the basics and work through down to the configuration. After opening the package, make sure the D-Link 1320 Wi-Fi extender, a power adapter, and a short setup manual are all present.
- Plug in the Extender: Find a good spot to plug in your extender after choosing this. It needs to be placed somewhere between your router and the region that requires a stronger signal. As soon as the power LED turns solid green.
Step 2: Establish a connection with the extender
It’s time to link your extender to your current Wi-Fi network now that it is turned on.
- WPS (Wi-Fi Protected Setup) connection:
- Find and push your router’s WPS button. For the next step, you generally have two minutes.
- Press the D-Link 1320 extender’s WPS button during this period of time. When the extender notices a router connection effort, its WPS LED should begin to blink.
- The WPS LED will turn solid green when the connection is established.
- Connect Manually:
- The network name (SSID) of the D-Link 1320 can be discovered in the Wi-Fi settings on the device you are using.
- Link up to this network. Once connected, launch a web browser and enter the default IP address, 192.168.0.50, or “http://dlinkap.local” in the address bar.
- The D-Link setup wizard will open as a result. After selecting your current Wi-Fi network and entering your password, follow the on-screen directions to finish the setup.
Step 3: Set Up the Extension
It’s crucial to set up your extender after it is linked to make sure it functions as best it can.
- Enter the Extender’s web interface and log in:
- Go to “http://dlinkap.local” or “192.168.0.50” in your open web browser.
- Enter the login details that come with the account (username: “admin”, password: “admin” if it was set at initial setup).
- Configuring the network:
- Select “Wireless Setup” after selecting the “Setup” tab.
- “Manual Wireless Network Setup” is the option to select.
- Here, you can adjust the security settings and network name (SSID) of the extender here. A unique suffix, such as “HomeNetwork_EXT,” should be added to your extender’s SSID to make it stand out from the rest of your network.
- Positioning and Testing:
- After setting it up, unplug the extender and transfer it to the proper spot, which should be halfway between your router and the weak signal region.
- Once plugged in, watch for the LEDs to settle down. The signal strength indicators can help you in determining the best location; red lights indicate a weak connection and green lights indicate a strong one.
Step 4: Final Verifications
Make a few last adjustments to make sure everything is configured properly:
1.Test the Connection:
- Using a mobile device, go about your house or place of work and measure the strength of the Wi-Fi signal in different spots. In regions where coverage used to be weak, you should see an improvement in signal strength.
- Reorganize if Required:
- You may have to move the extender or adjust the settings using the web interface if the signal is still weak.
Advice for Troubleshooting:
- Let’s reset the extender:
- If you experience any problems, try pressing the reset button down for around ten seconds to reset the extender to its original configuration.
- Update the firmware:
- Make sure the software on your extension is up to date. To install any updates that may be available, check the D-Link website and follow the installation instructions.
A simple procedure that can greatly improve your Wi-Fi coverage is connecting a D-Link 1320 Wi-Fi extender. You may have perfect connectivity in every area of your house by following these instructions. Have fun exploring around!