Having a Linksys Velop Keep Disconnecting error?
In this Blog, you can find out the solution of your problem, and then read carefully after that move
further and implement the solution.
First, we relating about the little but brief on Linksys Velop. After that, we will explain the solution part.
Linksys Velop is one of the best home mesh WIFI system that enhance the existing Wi-Fi signal strength
Providing the complete wireless coverage throughout the home.
We will make you aware with a few fast fixes to get rid of the Linksys Velop Wi-Fi dropping issue. Move
further and Read first some causes behind the error.
Reason- Why we are struggling with Linksys Velop Wi-Fi Connection dropping
We are explaining below three major causes of the Wi-Fi connection dropping problem between the
Velop router and the devices like PS3, Xbox, streaming devices, computers, and laptops. These are:
- Might be the issue irises due to low signal on the wireless router.
- Router Firmware needs to be update.
- Might be issue will arises due to wireless interference
- Try to Login again with Linksys Velop Login credentials
Now, we are going to converse the steps to fix this problem. First you have to check the wireless
connectivity of other wireless devices on the network before proceeding with the steps.
Let’s Start the Solution : Easy fixes of Linksys Velop Wi-Fi keep disconnecting
Reducing wireless interference
If the connection drops normally on your wireless device, then confirm the following:
- GHz interference: If your Linksys router and any other wireless devices like a cordless phone or telephone are using the same rate, then the chance of interference increasing more. To resolve this issue, you just change the router channel to 1 or 3 depending on the number of channels available so that over-lapping of channels does not take place.
- Physical obstruction: The problem arises due to physical obstructions like walls and floors at your place may result in connection dropping issues. To resolve this issue just move the device away from all these obstructions.
- Placement of the router: We are suggested to place the router at least three feet above the ground. If you are placing the router at a high location, then keep a distance of at least two feet between the ceiling, tips, and walls. In case, the signal can pass through the floors, then you can place the router on the top floor.
Update the firmware of the router
If you are getting instant any network disconnection issues on your Linksys velop, then it might be
happen due to the outdated version of firmware installed on your router. You can update the router to
the latest version and check if the problem has been resolved or not. To update the firmware version of
Linksys Velop, first you must open the default web-interface of the router after that click on the
‘Update’ link.
After updating the firmware of the router, now you need to upgrade the firmware of wireless devices as
well and now try connecting the devices to the Linksys Velop, if you are still facing connection problem,
then contact experts and get the solution. After doing these try to Linksys Velop Setup again.
For more detail contact us at +1(803) 440-8550 and get the resolution of your problem.